Need Help? 01-873 0466
or [email protected].

Aladdin Paraffin Heater Wick - For Model 203

€20.99
In stock
SKU
TP_104044
Only 9 left in stock! 9 Sold Recently
Estimated Delivery
Valor W33 Paraffin Heater Wick Previous Valor W33 Paraffin Heater Wick

Aladdin Paraffin Heater Wick - For Model 203

  • Paraffin heater wick
  • For model 203
  • Part no: 929905
  • Use only genuine Aladdin Wicks, as using other wicks may result in poor performance and cause problems for which Aladdin cannot be responible.

To fit the new wick:

  • Remove burner from tank.
  • Take out flame spreader.
  • Remove outer wick tube by turning anti-clockwise and lifting.
  • Turn wick up fully and pull it out of burner with wick carrier.
  • Pass paper tabs on new wick through the two semi-circular slots in burner base. Pull tabs until bottom of tape isnside wick is just below top edge of centre tube.
  • With arms uppermost fit carrier to burner on winder side so that the rack slides over guide inside large tube.
  • Push carrier down until rack just engages with winder cog. Ensure that they are properly engaged, then turn down wick.
  • Pull tails of wick evenly so that wick carrier rack engages with wick winder mechanism inside large tube. Turn down wick as far as possible.
  • Replace flame spreader (holes uppermost).
  • Replace outer wick tube by locking it under all three pips inside rim of burner.
  • Tear paper tabs from wick. Replace burner in tank. Fill container with paraffin and allow the new wick to soak for at least one hour before lighting.
Customer Questions
No Questions
Please note: only customers that are logged in will be able to post questions
Write Your Own Review
Write a ReviewAladdin Paraffin Heater Wick - For Model 203
To Top
Aladdin Paraffin Heater Wick - For Model 203
Aladdin Paraffin Heater Wick - For Model 203
€20.99
Add to Wish List
Help
Shop
Account
Wishlist
0 Cart