Brass Wood Screw 1½" x No.8 — Single

A solid brass wood screw in a 1½ inch length and No.8 gauge (approximately 4.2mm diameter). Brass screws are used where a corrosion-resistant, non-staining fastener is needed or where the screw head will be visible and a decorative matching finish is preferred — most commonly with brass door furniture, cabinet hinges, box hinges, drawer runners and traditional woodwork fittings.

Brass is softer than steel, so drive with care — do not overtighten, and avoid use in hardwoods without a well-prepared pilot hole or the screw may shear. Use a pilot and clearance hole for best results. The head type may vary (countersunk or raised countersunk) — check the head profile for your fitting's requirements. Single screw supplied.

• Material: Solid brass
• Length: 1½" (approx. 38mm)
• Gauge: No.8 (approx. 4.2mm)
• For cabinet hinges, door furniture and decorative timber fittings
• Drill pilot and clearance holes — brass is softer than steel
• Head type may vary

Supplied as: 1 x screw