Fleetwood Difficult Surfaces HI-HEAT All-In-One Paint & Primer - 500ml

Fleetwood Difficult Surfaces HI-HEAT All-In-One Paint & Primer - 500ml

• Fleetwood High Heat metal Paint is a high quality enamel designed for use on stoves, chimneys any metal surfaces where temperature will not exceed 600°C indirect heat
• From Fleetwoods Problem Solving Paints range
• Interior & Exterior
• Solvent based
• Black satin finish
• 500ml

Prepration:

• To ensure best results surfaces need to be sound, clean and free from grease, oil or other contaminants before application
• Bare metal needs to be free of any rust or corrosion

Application:

• Stir thoroughly before use and apply by bristle brush
• Apply 2 coats
• Do not apply in temperatures below 7 degrees

Drying Time:

• Touch Dry in 20 minutes - Hard dry 30 minutes after reaching 220°C

Coverage:

• 15m2 per litre

Clean Up:

• Clean up with cellouse thinners