Rust-Oleum Switch Anthracite Matt Multi-Surface Spray Paint 5-in-1 Adjustable Nozzle
Rust-Oleum Switch Anthracite Matt Multi-Surface Spray Paint 400ml – 5-in-1 Adjustable Nozzle
5-in-1 Adjustable Spray Nozzle
Choose from High Output, Standard, Low Output, Vertical Fan and Horizontal Fan spray patterns for precise control.
Multi-Surface Application
Suitable for wood, plaster, brick, stone, concrete, uPVC, ceramic, cardboard, glass, plastic* and metal*.
(*Bare plastic and metal may require a suitable primer.)
Modern Matt Anthracite Finish
Delivers a smooth, contemporary matt coating ideal for decorative and renovation projects.
Fast Drying Formula
Touch dry in 15 minutes and hard dry in 4 hours.
Interior & Exterior Use
Durable coating designed for indoor and outdoor applications.
Comfortable Trigger Spray
Ergonomic design for improved handling and reduced fatigue during use.
Minimal Drips & Overspray
Ensures cleaner application and professional-quality results.
Toy Safe Certified
Certified to BS EN 71-3: 2019+A1:2021.
-
Brand: Rust-Oleum
-
Product Type: Multi-Surface Topcoat Spray Paint
-
Colour: Anthracite
-
Finish: Matt
-
Volume: 400ml
-
Application Method: Aerosol
-
Coverage: Approx. 2m² per can
-
Drying Time: 15 minutes touch dry
-
Recoat Time: Less than 1 hour
-
Maximum Heat Resistance: 90°C
-
Number of Coats: 2
-
Base: Solvent-based
-
Texture: Smooth
-
Location: Interior & Exterior
-
VOC Level: Very High
-
Container Type: Spray Can
-
Storage: Protect from sunlight. Do not expose to temperatures above 50°C
Safety Notice: Always follow the instructions on the container. This product is not suitable for persons under 18 years of age.
Application & Drying Guide
Preparation:
Ensure surfaces are clean, dry and free from loose paint, rust, wax, oil and grease. Previously painted surfaces should be lightly abraded. Bare wood and metal should be primed with Rust-Oleum Surface Primer, and bare plastic should be primed with Rust-Oleum Plastic Primer. Always test on a small inconspicuous area first.
Application:
Shake the can vigorously for 1 minute after the mixing ball begins to rattle. Select the desired spray pattern using the dial. Hold approximately 30cm from the surface and spray using a steady back-and-forth motion with slightly overlapping strokes. Apply light coats every 15–20 minutes until the desired finish is achieved.
Drying Times (at approx. 15°C):
-
Touch dry: 15 minutes
-
Hard dry: 4 hours
-
Recoat: within 1 hour or after 24 hours
After use, invert the can and spray for 2–3 seconds to clear the nozzle.








