Rust-Oleum Switch Seashell Satin Multi-Surface Spray Paint 400ml – 5-in-1 Adjustable Nozzle

Rust-Oleum Switch Seashell Satin Multi-Surface Spray Paint 400ml – 5-in-1 Adjustable Nozzle

5-in-1 Adjustable Nozzle
Choose from High Output, Standard, Low Output, Vertical Fan and Horizontal Fan for complete control on both broad surfaces and detailed areas.

Smooth Satin Seashell Finish
Provides a durable, elegant mid-sheen finish that brightens furniture, décor and home improvement projects with a subtle neutral tone.

Multi-Surface Application
Suitable for wood, plaster, brick, stone, concrete, uPVC, ceramic, cardboard, glass, plastic and metal. Bare plastic and metal may require a suitable primer.

No Primer Required on Most Surfaces
Designed for direct application to many prepared and previously painted surfaces, helping reduce preparation time.

Fast Drying Formula
Dries to the touch in just 15 minutes and is hard dry in 4 hours, allowing projects to be completed quickly and efficiently.

Interior & Exterior Use
Suitable for use inside and outside the home, providing long-lasting durability in Irish weather conditions.

Toy Safe Certified
Certified to BS EN 71-3: 2019+A1:2021, making it suitable for use on toys once fully cured.

Comfortable Trigger Spray
Ergonomic trigger design improves handling and control for smoother application.

No Drips or Overspray
Advanced spray technology ensures a smooth, even, professional-quality finish with minimal mess.

Single Hazard Formula
High-performance formulation with clear and compliant safety guidance.

Application & Drying Information

Preparation:

Ensure surfaces to be painted are free from loose paint, rust, wax, oil and grease. Previously painted surfaces should be abraded to provide a key. Bare wood and metal should be primed with Rust-Oleum Surface Primer. Bare plastic should be primed with Rust-Oleum Plastic Primer. Cover surrounding areas to protect from spray mist. To ensure paint suitability, test on a small inconspicuous area first.

Application:
Shake the can vigorously for 1 minute after the mixing ball begins to rattle and continue to shake regularly during use. Select the preferred spray pattern by turning the dial to one of the five options. Hold the can approximately 30cm from the surface and spray in a steady back and forth motion, slightly overlapping each stroke. For best results, maintain a consistent distance from the surface, keep the can in motion and apply a light coat every 15 to 20 minutes until the desired finish is achieved.

Cleaning:
After use, invert the can and spray for 2 to 3 seconds to clear the spray nozzle. Repeat this step for each nozzle setting used by rotating the dial.

Drying & Recoating:

Touch dry in 15 minutes.
Hard dry in 4 hours.
Recoat within 1 hour or after 24 hours.
Drying times are based on warm 15°C, dry application conditions with good ventilation. Lower temperatures and higher humidity will prolong the drying times.

Health & Safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions carefully.

Caution: Not suitable for under 18s.