Need Help? 01-873 0466
or [email protected].

Thompsons Quick Drying Drive Seal - Black 5L

Rating:
100 % of 100
€39.95
Over 10 in stock
SKU
TP_228063
Find me in our Capel Street store
Thompsons Upvc Restorer 480ml Previous Thompsons Upvc Restorer 480ml
  • Tarmac drives take a battering from the elements and your car.
  • That's where Thompson's Quick Drying Drive Seal comes in.
  • It'll waterproof and protect your tarmac from oil and petrol stains and revive it to look like new again.
  • 6m²/L per coat depending on the porosity of the substrate.
  • Thompson's Drive Seal is a high-performance acrylic coating specifically designed to enhance the appearance of tarmac drives and obliterate existing stains.
  • Its quick drying formulation means that the drive can be back in use in as little as 4 hours.
  • Once dry Thompson's Drive Seal reaches its optimum performance after a few days and gives an attractive, low sheen, slip resistant finish which provides unrivalled protection from weather damage and prevents oil and petrol spills leaving unsightly stains on the surface.
  • For maximum performance ensure all surfaces are clean and free from any dust or loose material that may interfere with the adhesion of Thompson's Drive Seal.
  • Remove dirt, moss, lichen, dust or loose material by brushing with a stiff bristle brush.
  • Use Thompson's Oil & Drive Cleaner to remove existing oil/grease deposits and to clean driveways prior to application.
  • Thompson's Drive Seal can be applied by long pile roller to damp, but not saturated surfaces.
  • Using a roller tray, load the roller fully and apply in an even coat ensuring all irregularities are covered.
More Information
Available Colours Black
Write Your Own Review
Write a ReviewThompsons Quick Drying Drive Seal - Black 5L
Customer Questions
How many cans do i need for 60 sq meters
Hi Thank you for your question. According to the manufacturers guidelines the coverage is 6m²/L per coat depending on the porosity of the substrate.. A 5L can should cover approx 30m², so 2 x 5L cans should be sufficient for 1 coat on 60m²
Did you find what you were looking for?
To Top